The water system in the house must really be taken into account its continuity so as not to be detrimental to daily life. However, after being used for a long period of time, various factors can cause problems in the water system in the house, such as leakage, blocked ducts or damaged pipes. In the following article, there are 4 ways to overcome water problems in a house that can be useful and needed by anyone. Aside from that, check out the reliable plomeros en Tijuana as well.

1. Handle clogged pipes

The main cause of pipe blockage is usually food, which accumulates over a long period of time so the water cannot flow. You can check and clean the pipeline yourself by removing food scraps that are trapped inside the pipe using fat removal ingredients and leftover food available on the market.

2. Handle leaky faucets

Faucets in bathrooms, toilets or kitchens after several times of use can easily leak. Caused by oxidation of faucets or valves in open channels, the solution to clogged faucets is to use steel wire material coated with a layer of iron or with small tin inserted into the faucet hole, then use a hammer to crush steel or tin into the slot it is evenly distributed, flat with a water pipe. Then, use iron on the body of the bicycle and cut it into pieces of 0.3 – 0.6 cm. Use a wire to tie it tightly.

3. Handle pipe leaks with coupling techniques

To handle pipe leaks with coupling techniques, you first need to prepare glue, the glue that is suitable for dealing with problems like this. When using adhesive or binder, easily apply glue around the connecting ring, and rotate it to bind with the coupling technique.

4. Check pipe leak due to cracks

To deal with a pipe leak due to cracking, first use tape or black adhesive to tighten and close the crack, and make sure you leave the remaining tape on each side that is cracked about 1 cm each so that there will be no water leakage.